First off I am a Linux beginner and a total hack job, but I'm learning. I am running Fedora version 40, 64 bit.
I installed CQRlog and it wouldn't start, I searched my error and found I needed to delete ~/.config/cqrlog folder. This got the program working. Fast forward a few days and I am in the middle of updating a qso with a confirmed qsl. CQRlog froze and I got this error. Error during connection to database: TMySQL57 Connection : Server connect failed.
failed - here are the last 20 lines or so
2024-08-31 8:24:30 0 [ERROR] Can't open and lock privilege tables: Table 'mysql.servers' doesn't exist
2024-08-31 8:24:30 0 [Note] Server socket created on IP: '0.0.0.0'.
2024-08-31 8:24:30 0 [Note] Server socket created on IP: '::'.
2024-08-31 8:24:30 0 [Warning] Can't open and lock time zone table: Table 'mysql.time_zone_leap_second' doesn't exist trying to live without them
Hi,
I have read https://www.cqrlog.com/node/3462 and it says:
Most common reasons that come in to my mind are that your script has no exec bit, but if you can run it from command line and it works, then next is your rig is not on phone mode.
Or at least Cqrlog does not know it.Do you have right mode at NewQSO mode, and also TRXControl has red text in some of phone mode buttons?
Start Cqrlog from console:
cqrlog --debug=1
And you should find these lines when you press a F-key:
I have my setup with 2 monitors. I use the left for FLRig, WSJT-x with waterfall, and a terminal window if I need one. I use the right monitor for CQRLOG qso list and the New QSO window. The problem I have is when I start CQRLOG it defaults back to the QSO list on the left monitor and the New QSO window on the right monitor. Is there a way to save my layout so it starts the way it was when I last ran it, or the way I saved it?
Hi,
After upgrading from ubuntu 22.04 to 24.04 I can't acces my database files any more.
here's the last lines of the error log:, hope this helps...
Thanks in advance,
Geert
This week I upgraded my PC from Ubuntu 22.04 to 24.04 but cqrlog that was installed was no longer available. I tried to run it through the terminal but it was not recognized.
The cqrlog folder exists and I have a backup of my logs. When I tried to install through Synaptic, I suspended the installation because I was warned that the following packages would be removed:
Good evening,
I've just updated my CQRLOG installation to above mentioned Version on Ubuntu Mate 22.04.3. At this time there are no open issues and all things seems to run properly. Thank you for sharing this software with us and have a nice day.
Hardy, DL8YDU
Hello to the whole group. I use cqrlog version 2.5.2 on an arch distro. I use two radios a FT3000DX and a FT991A. Used individually I have no problem, but when both are turned on the USB port references (/dev/ttyUSB*) are changed every time. I tried to assign names to the ports with udev rules but a radio the FT3000 works while if I switch to the 991A the PTT is activated immediately. I'm forced to use one radio at a time, if I turn one on I have to turn the other off. Does anyone have a tip for me on how to fix this problem.
I tried Callbook --> database update. I have not another correct dxcc_ref, so cannot import it.
In searching KH8 in dxcc_ref box, I can find WE9G/KH8.
What can I do ?
I have several log entries that are blank under the LoTW sent column. There are a number of them that have been sent, and are shown on the LoTW website. I can find no way to edit that entry for any QSO entry in CQRLOG. When I select edit QSO, there is no editable field for QSL sent. I would like to request that first of all I can sort by any viewable column in the QSO list. That would group together all of the LoTW entries that are blank in the sent column.
Had everything working fine on Mint 22, then updated to the latest alpha version and get Access Violation ran CQRlog in debug and it looks like there is a port issue, I am part of the dialout (I checked) and CQRlog was working before the update, everything else seems to be working fine, using a Timewave Navigator.
Cqrlog Ver:alpha_(130)_Gtk2 Date:2024-08-12
**** DEBUG LEVEL 1 ****
TMySQL57Connection : Error executing query: Table 'cqrlog_main' already exists.
When i boot cqrlog, the panel for creating a named log pops up. There is no log listed.
When I try to create one, I get the error on line one above.
I don't know where to find the db or table to delete it.
Mariadb is running.
Thanks for any suggestions.
I think I have an installation issue but I cannot resolve it. When I try to upload QSO's to LoTW, the selecting works fine, and the file is created, but then It gives the message "Signing adif file..." and freezes at that point. If I open TQSL and ask it to sign and upload the file that CQRLOG created it uploads fine. Any ides what the issue is?
Thanks and 73,
Mike, AE8U
Hi there,
I'm a total newcomer to the world of Linux and CQRlog, I managed to install it and run it, but the CAT connection to my FT710 creates a lot of head scratches.
I started it in terminal and get the following messages:
volker_keller@volker:~$ cqrlog
Gtk-Message: 19:42:55.672: Failed to load module "canberra-gtk-module"
(cqrlog:4604): GLib-GObject-WARNING **: 19:42:56.383: ../../../gobject/gsignal.c:2613: signal 'populate-popup' is invalid for instance '0x37515e0' of type 'GtkCellView'
I have a new installation of CQRLOG running in Ubuntu 24.04 on a Raspberry Pi. I have installed MariaDB and want to use it for my database. However, when I start CQRLOG, it gives me an error that MySQL could not be started. It also has an additional dialog box that states Error during connection to database: TMySQL57Connection: Server connect failed. (Which I assume is because I do not have MySQL installed.) How do I get CQRLOG to look for MariaDB instead of MySQL?
Thanks and 73,
Mike, AE8U
New computer, new OS, Mint 22, mysqld errors, takes me to a mysql screen that is looking for a password,
Can't paste the window....
Hi
I was working with Cqrlog & Jtdx & GridTracker with no issue under Ubuntu 22.04.4 LTS. Being bored of Jtdx and the lack of updates I decided to move to a recent version of wsjtx.
So I installed wstjx and I realised that a new version of hamlib was also installed. The old version of hamlib is not deleted (I do not know how and I found no hint to do so).
Hi, new installation of Linux Mint 22. moved .Config/cqrlog from old LM 21
Serial Port I have on ttyUSB0 and ttyUSB1. Below are the results from the console. What am I doing wrong?
Thanks for your help in advance, 73 Tom SP4TB
Cqrlog Ver:alpha_(129)_Gtk2 Date:2024-07-30
**** DEBUG LEVEL 0 ****
**** CHANGE WITH --debug=NR PARAMETER ****
*** Parameter -h or --help for details ***
I saw this error when I tried to export csv for printing.
TMySQL57Connention : Errpr executing query: Incorrect string value: '\xD0' for column `cqrlog001`.`qslexport`.`qth` at row 1.
What should I do in ver 129 (2024-07-30) ?
I upgraded from Linux Mint 21.3 to 22. After I did CQRLOG reverted back to 2.5 so I upgraded to Alpha (128) gtk2 0wpm which works as it should except that when I try to upload to LOTW I get this error:
/usr/local/bin/tqsl: error while loading shared libraries: libwx_gtk3u_core-3.0.so.0: cannot open shared object file: No such file or directory
Sign failed somehow. The exit code was 127 it should be 0 (zero)
Try to find reason for this
Do I just need to load libwx_gtk3u_core-3.0.so.0 to solve this? If so where can I find it?
I tried to upgrade my version 2.6.0 (001) gtk2 to 2.6.0 alpha 126. I read, but didn't fully understand exactly what Saku meant on the upgrade page about the following:
I have been using cqrlog for a long time.
I do *NOT* use a 'local' database because I access the database from more than one computer.
I've just moved to a new system after the old one died - but I have a non-bootable image of the disk, so all my files are okay.
The new system is Debian 12 (Bookworm) with the KDE desktop
I installed Maria-DB server and client.
I then installed the Debian package for CQRLOG which is version 2.5.2
When I try to run it I get the following message.
Hi,
Just compiled Saku's alfa_(129)_qt5 version. Working fine. But in other 2 or 3 threads I can read about dark theme. How to get it? I can't see any dark theme option to set in preferences. It must be built with any parameter or am I blind?, Hi hi
Slaveck, SP3RXO
I am running CQRLOG 2.5.2 on Ubuntu 22.02.4. I am trying to change the "LoTW QSL sent" value on both to "N" so I can get them uploaded to LoTW. I am doing the following:
1. Select both QSOs in the QSO List
2. Select "Group Edit"
3. Select "LoTW QSL Sent" in "Field" - Note, "Y" is displayed as the value
4. Select "N" for the new value
5. Click on "Apply" - Note, receive the "Edit done! (Press Cancel to exit)" message
6. Press "Cancel"
Hi all,
As my title states, I am unable to upload to Clublog from CQRlog 2.5.2.
I tried debug but it tells me nothing.
In my opinion the programmed URL for Clublog could be wrong because it changed in all the years since I first started using CQRlog.
I tried to change it a bit using Hexedit but to no avail.
At first I am not that handy with Hexedit and more important, I would not know the proper URL anyway.
Recent comments