Advanced Forum Search

An invalid vocabulary is selected. Please change it in the options.
TRX Control of Radio Two

I've successfully configured the TRX Control to work with my TS-590 on Radio One and would like to add my KX3/KXPA100 as Radio Two. However, when I switch to Radio Two it either shows 00000 or it copies the TS-590 setting and controls it.

Setup:
Ubuntu 12.04 LTS
Elecraft USB cable connected to the jack on the back of the KXPA100
Speed set to 38400 on KX3/KXPA100 (successful connection with KX3 and KXPA100 utility)
RigId: 231 K3/KX3
/dev/ttyUSB2 (checked to ensure it is the correct USB device)
Default Settings on all others

CQRLOG 14 dec 2015

New testing version is here: http://www.cqrlog.com/files/beta/cqrlog_20151214.tar.gz

CHANGELOG:

CQRLOG 07 dec 2015

New betaversion is available at http://cqrlog.com/files/beta/cqrlog-2015-12-07.tar.gz

CHANGELOG:

+ program should work also with MariaDB 10.1
- program crashed after opening Preferences when path to rigctl was empty - fixed
- RBN monitor didn't show any data when RBN didn't send any operating mode

How to try this beta version is described here: http://cqrlog.com/node/1526

Thank you!

MariaDB 10.1

Breaks TMySQL56Connection

Propagation window

Hi Petr
I see OH1KH version of propagation window much more
informative, than this in new 1.9.1 version. In OH1KH
version, you get both Boulder and Kiel statistics same
time. I use Kiel statistics, rather, because they are
more useful on these levels than from Boulder.

Could you consider to try OH1KH version?

Database error exporting filtered QSO list

In version 1.9.1, whenever I try to export ADIF from a filtered QSO list, I get the familiar database access violation error and the export fails. If I don't use a filter, I can export with no problems at all. I haven't been on HF in a while, so I don't know when this became broken.

CQRLOG does not copy data from old QSO

Hello,

I have just upgraded to CQRLOG 1.9.1

If I enter a new QSO with a station I worked before, the data from the old QSO (name, QTH etc.) is not copied. Instead the data from the external data base (qrz.com etc.) is taken like for a new call sign.

This is a bit annoying since the "QSO name" is often different from the name on qrz.com (Tom, Thomas), and the QTH field is empty.

This behavior is new in 1.9.1.

Regards,
Wolfgang

cqrlog: Can't run binary file

Hi !

I did as you stated on second sticky message.
Extracted tarball to test directory and then cd to ./bin/ and tried to start.

No luck.

[saku@minipc bin]$ ./cqrlog
bash: ./cqrlog: binääritiedostoa ei voida suorittaa
(can not execute binary file, in english)

I even copied the binary over exisiting (working) /usr/bin/cqrlog with same results:

Station worked latitude and longitude Where is it stored

Hello,

It appears as though the Latitude and Longitude of the station worked are displayed in the right pane of the New QSO form. This information must be stored somewhere as it changes with each QSO as it appears in the view mode.

I want to write a SQL query to obtain Call, Date, Latitude, Longitude and export the data to a CSV file. I do not see this data in the table definitions I have. Are there new table definitions? What table is this data stored and what are the field names?

73,
Marty, N3MOW

CQRLOG 01 dec 2015

The testing version is here:

cqrlog_20151201.tar.gz

CHANGELOG:

  • CW type window was not sizeable - fixed
  • cqrlog-apparmor-fix script fixed

Please try it and let me know. Small how to is described here: http://www.cqrlog.com/node/1526

How to test CQRLOG

I'll release testing version of CQRLOG (almost) every week or often. It will be saved here as 64bit binary package complete with all files ready to extract to your home directory. DEB files of this testing versions will be released before final release.

Please untar the package to you home directory. Before you run cqrlog binary, please backup your ~/.config/cqrlog directory. These testing versions shouldn't damage your data but it's always better to backup :).

If you find any problem, run cqrlog in debug mode. Open terminal and type this:

WSJTX and kvasd.dat

First, WSJTX is running fine Standalone without Errors.

After starting it remote, i got the old Error with kvasd and kvasd.dat about permissions or not installed.

wsjtx and kvasd are in /usr/bin

kvasd.dat is in several places:
$home
$home/.wsjtx
$home/.local/share/wsjtx
(Try and Error)

Selecting File-Preference fails

After upgrade to 1.9.1
getting "Cannot execute empty command-line."

CW Type window

Not sure if the log is suppose to do this, but when I have the CW type window open, I can't put anything in the main log window, so the only way to log a qso with the CW type window open is to close it first, the CW keys works great. 73 Tom K8WDX

RBN Monitor .. change settings lets crash CQRLOG

Hi Petr,

the RBN monitor is a great feature! Just found a bug or two while using it ...

When I try to change entries in the filter criteria window of the RBN monitor, CQRLOG crashes. When it shows me the 'Access Violation' window and I can keep on using CQRLOG without any problems, but sometimes it crashes completely without any notification. It seems to be a problem whether the RBN monitor is connected to the RBN (no crash) or if its not connected (crashes).

cqrlog-apparmor-fix

Hi Petr,

after the update to version 1.9.1, the apparmor problem occurs to me.

Therefore I started cqrlog-apparmor-fix, but this was not successful.

So I added a "@{HOME}/.config/cqrlog/database/** rwk," directly in /etc/apparmor.d/usr.sbin.mysql.

This then works.

"cqrlog-apparmor-fix" works with the file "local / usr.sbin.mysqld", but in "/etc/apparmor.d/usr.sbin.mysqld" the include command apparently does not work ???

communication rigctl/cqrlog

Hello,
I have a problem. RIGCTL listen TRX of information but they do not send the data to CQRLOG.

RigCtldPath:/usr/bin/rigctl
RigCtldArgs:-m 237 -r /dev/ttyUSB0 -t 4532 -s 115200
RunRigCtld: FALSE
RigDevice: /dev/ttyUSB0
RigCtldPort:4532
RigCtldHost:localhost
RigPoll: 300
RigSendCWR: FALSE
RigId: 237

rigctld started!
Connected to localhost:4532
1
2
3
4
5
6

73 Julien

Mint Step by Step Install?

I would really like to install CQRLOG on my Linux Mint 17 system but after several tries have not been successful do to issues with mariadb.

I am a trying to learn linux ham and am lost as to how to proceed.

Is there a step by step installation guide available?

Or, any help with this would be greatly appreciated.

Thanks,

Mike - N3XPD

Possible database issue

Followup to posting below: it seems like something must have been corrupted; a number of my contacts were showing crazy values for dxcc_ref. I saved everything to an ADIF, started a new log, and imported the ADIF, and things seem to be sane again.

CQRLOG on Porteus Linux

Hello,

I have download the cqrlog_1.9.0_i386.tar.gz Package and unpack it under Porteus Linux. Porteus Linux is a portable Linux Distribution which is based on Slackware Linux. I have tested Porteus with KDE and MATE and I think it is a good choice.

When I start CQRLOG I want to connect to a SQL-Server on a RaspberryPi (not mariaDB) I get an error with the message that the libmysqlclient.so ... is not installed. In Porteus Linux this package is not available in the package manager, so I have installed the complete mariaDB package and now CQRLOG works.

cqrlog 1.9.0-5 error

debian testing/stretch amd64
cqrlog 1.9.0-5 not start

http://imgur.com/qOn1SfJ

cqrlog (1.9.0-5) unstable; urgency=medium

* Bump debian/compat to 9
* Apply apparmor fix to /etc/apparmor.d/local/usr.sbin.mysqld
*not* to /etc/apparmor.d/usr.sbin.mysqld which is a conf file
(Closes: #801755)

-- Colin Tuckley Thu, 12 Nov 2015 10:12:00 +0000

cqrlog (1.9.0-4) unstable; urgency=high

Upload to eQSL

Hi,

Server connect failed.

Hello to the group.

I can log into CQRLOG with my username and password but when I try to run the program, this is the message I get.

Any suggestions?

Error during connection to database: Server connect failed.

CQRLOG compiling error

Hello Petr!

Bug or Other Problem

I've been off of CQRLOG since Ubuntu dropped support for RS-232 ports, and recently returned.

I have the rig control working normally, in that it reads the radio info correctly.

here's the problem...

For instance, the radio is set and operating on 14.02500 and I click
on a DX spot, the progream now shows the frequency as 114.02500.
If I am on a lower band, for instance 7.02500.. and I click a spot the
program now shows 107.12500

Pages