Hello!
I just started, I'm using CQRLog 2.3.0 amd64 deb on a Deepin 15.11 distro.
I also had this same problem on Mint.
I imported an ADIF from MacLoggerDX to CQR.
On CRR - qso in log number is correct: 1323 entries or very close, But my oldest logs are not showing. Only IF I do a search for an old qso, is it shown.
As I enter a new entry the oldest qso disapears. This isn't what I want. My question is how do I proceed so I can view all my log entries.
I purchased a new Transceiver ALT-512 (https://www.aerial-51.com/alt-512/), The ALT-512 transceiver has a claimed compatibility only with Windows :-( with claimed TS-2000 compatibility,
My computer is a Mintbox, using Linux Mint 19, so I had to battle a bit, to succesfully read the frequency of this transceiver, directly in CQRLOG,
The purpose of this note is to share my experience, in case it help others,
Please note that I am not using digi modes, so I cannot say if the ALT-512 is woking with linux programs,
My system runs on a Raspberry Pi 3. I usually have three programs running, CQRLOG 2.3.0 (001), WSJT-X 2.1.0, and a terminal window with cgps running to keep my clock aligned.
Things go well for some time, but after several days of constant use, it seems that the CQRLOG WSJT-X monitor window falls behind. If I quit WSJT-X, the monitor window stays up for a long time. Adding updates even when WSJT-X is no longer running. If I wait long enough, it eventually goes away. While it is up and changing it's display, I cannot get menus to respond in the rest of CQRLOG.
CQRLOG will not load. Hangs when connecting to database on local server. Can connect to server normally via commandline or mysql utility, but it seems to fail from cqrlog. Shows database connection window only.
--debug=1 shows following;
olaf@Fanless:~$ cqrlog --debug=1
(cqrlog:2829): IBUS-WARNING **: 23:20:14.641: Unable to connect to ibus: Could not connect: Connection refused
Cqrlog Ver:2.3.0 (001) Date:2018-06-17
**** DEBUG LEVEL 1 ****
How can i have cqrlog jump from CALL to RST (skipping over mode and freq) with no radio connected ?
Regin OY1R
Please excuse my bad english.
How can I upload only selected records or records from only one QTH-profile to eQSL?
In the dialogbox I only can select between "Export all QSOs" and "Export only QSO's which have never been uploaded". Which QSO's will CQRLOG exporting, if I use a Filter? Only the filtered QSO's or all QSOs?
Maybe you should save the different eQSL-Nicknames with the different QTH-profiles.
Hello everybody,
I am at the luxurious position that I have two locations at my qth where I can play with my radio's :-D
I have been using my Elecraft K3 with CQRLOG and Linux Mint with no problem for several years. I use an RS232 cable from the K3 to an RS232 port on the desktop Dell Optiplex380 and have never had a problem with rig control. I acquired a new Icom IC-7300 last week which uses a USB cable for rig control. I had no problems getting it connected as I have used USB adapters and cables with Linux in the past. At first i had an issue with RF taking out the USB connection and changing the USB port.
Hi there,
I m a newbie in linux and therefor also in CQRLOG.
I installed it an run it for the first time.
the error message tells me .... "" is an invalid integer.
this is the debug log
Cqrlog Ver:2.3.0 (001) Date:2018-06-17
**** DEBUG LEVEL 1 ****
CQRLOG had been working fine but today I get an error with mySQL when I start.
here is the output of cqrlog -debug=1
Cqrlog Ver:2.3.0 (001) Date:2018-06-17
**** DEBUG LEVEL 1 ****
When trying to open cqrlog for the first time i get the error.
TMySQL56Connection : Error executing query: Can't create database 'cqrlog_common' (errno: 2 "No such file or directory").
here is the debug output.
Cqrlog Ver:2.3.0 (001) Date:2018-06-17
**** DEBUG LEVEL 1 ****
<p>I've been trying to import QSOs from LOTW. I have about 150 that refuse to import, and I have no idea why. It says SSB is the "Wrong QSO mode." How can that be????</p>
<p><br /><APP_LoTW_OWNCALL:4>NM3S<STATION_CALLSIGN:4>NM3S<CALL:5>CE1TT<BAND:3>10M<FREQ:8>28.46300<MODE:5>SSB</p>
<p><APP_LoTW_MODE:5>SSB<APP_LoTW_MODEGROUP:5>SSB<QSO_DATE:8>20120304<TIME_ON:6>172000</p>
TMySQL56Connection : Server connect failed.
Ubuntu Mint
CRQLOG 2.3.0(001)
I can't launch the program I get ...
TMySQL56Connection : Server connect failed....
error when trying to load the database.
The database connection is empty.
What is the fix?
Where is the log database location and file name?
If I update CRQLOG will I lose my logbook?
Thanks
Carlos
KE5DFK
Hello,
I am using the Membership function of CQRLog and fill information about the membership in the award field. That works fine. If I press Esc Esc to clear my entries the Award field is not cleared.
Hello,
ok, it's not realy a but report but maybe a discussion, if CQRLOG has a problem with MariaDB 10.4 and how to fix it. At the moment, there are two topics with problems which are based on MariaDB 10.4
* https://www.cqrlog.com/node/2269
* https://www.cqrlog.com/node/2272
Hi to all, and thanks in advance for any advice.
With no mods in configuration, starting from some time, I can't download any information from eqsl.cc to my CQRLog.
I can, with no problem to upload, but in case of downloading I get: "Error: No such Username/Password found"; if I try to connect to the site with the same user and password I login with no problem.
I'm using Membership functionality to track my qso with members of 3 or 4 clubs. Everything works perfectly if I log my contacts 'on time' or 'off-line'. But AFAIK club's memberships are not checked when qso's are imported from an adif file, e.g. from the contest logger. I think it would be good to have membership checked after adif import.
Using Mint 19.2 64 bit. The grayline window has disappeared - I can barely see an outline of it but the window itself is transparent. There is a yellow dot next to grayline in the window menu that i don't remember seeing before. Did I do something? Everything looks OK in preferences.
73, Bill NZ0T
Hi!
I couldn't upload a QSO with 4Y1A to ClubLog, because they reject 4Y as entity. Since one edit to that QSO, no further QSO can be uploaded to ClubLog, because it always stops here:
ClubLog: Deleting original 4Y1A
ClubLog: Could not delete original QSO data!
So, I tried to mark all QSO as uploaded to ClubLog to be able to move on. But I get a message box, saying:
Could not mark QSO as uploaded:TMySQL56Connection : Error executing query: Data too long for column 'cmd' at row 1
I am a new user to CQRLOG and still deciding whether to stay, or run back to the safety of Windows and HRD. I'd like to stay...but there are some challenges.
Hello,
I have a question (sorry for bad english...hi..)
i have a problems with automatic log upload.
I have this message:
(working well with HamQTH but i have a bad message with HRDLog.)
The only solution (fr the moment) is to mark qso as updated !
I upgraded to Mint 19.2 from 19.1 last week and CQRLOG works fine except that when I try to access the preferences or anything else after it has been up for a while the windows become frozen. Once I get out of CQRLOG and bring it back up it operates normally. It seems to happen after I have been using WSJTX with the remote feature.
Thoughts?
73, Bill NZ0T
Hi
I have CQRLog (V2.3.0) running in two different environmernts/systems
System 1 PC with Ubuntu 19.04 and no issues. I use this to compare with system below.
System2 Raspberry Pi 3 under Raspian 9. OK on a monitor but not on a small touchscreen.
Hi All,
I just upgreded CQRLog to the beta version 2.3.0 (003) dated on 2019-07-26. Upgrade was smooth and logger working fine. As I read and as I can see CQRLog has now a new column named 'Contest name'. Until now, I kept info about the qso's made in contests in the 'Comment to QSO' column.
I'm not very friendly with database operations, so my question is: How to move info from 'Comment to QSO' to the new 'Contest name'?
Thanks for help,
Slav
Hi,
I made several test qso's and then deleted them.
Yesterday when I was getting the qsl and attachments (call_data folder) figured out I found the menu option to display all 'comments to qso'.
It listed several comments I had on current qso's, but also still had the comments from the test qso's I had deleted.
It appears that that data is not cleaned up when the qso is deleted.
Not a big deal, not a critical bug, but just wanted to mention it.
Thanks again for a great logging program.
73,
Dan - WA4GSD
Recent comments