Hi All,
I'm using a Raspberry Pi running on a 32bit bullseye OS.
I have installed CQRLog using sudo apt-get install cqrlog.
This has installed the version 2.3.0.
How can I update to the last version (2.5.2.) ? I downloaded the tar.gz source code and run ./configure but without success.
How can I upgrade please ?
Thanks in advance.
73,
Gaëtan, ON4KHG
There is a problem how CQRlog logs QSOs that start prior to midnight GMT and end after midnight GMT.
If you start a QSO prior to midnight GMT (23:55 example) and end the QSO after midnight GMT (00:05 example) CQRlog will take log the entry as 23:55 with tomorrows date. Then for the next 24 hours all logged QSOs will be logged PRIOR to the example above.
How long has this been going on and no one has noticed?
This means the date will be tomorrow's date but will have a time of say 23:55.
Hi, total new guy to Ubuntu and Linux.i have the latest version on Cqrlog from the web site and a fresh install of Ubuntu 20. Cqrlog and wsjtx work fine alone. But when I use remote for wsjtx it will not connect to the radio. I have searched, but have not found anything that seems to help. Thanks in advance.
Dave
Kd2sam
Hi
When I has open the first log I set the callbook support with QRZ.com I put my username and password, everything it's ok.
When I put new call in the windows appears informations of correspondent from QRZ.com, ok.
After I open e second log and has put same set for callbook support but if put new call don't give me nothing informations.
Why ?
i use cqrlog for my personal log but when using it for contest when i verify the cabrillo file, it does not add the inc number sent and the number rcv, and when i check in the view qso window the info is not there, the same happened in the last contest where you needed to add the state, i have to add/edit this in the cabrillo file manually? thanks in advance
I have just installed CQRLOG,but I cannot find how import a log (Lotw).
Any Help please?
VE3RR Larry
Dopo aver Installato CQRLOG, all'avvio si presenta questo errore:
Cqrlog Ver:2.5.1 (001) Date:2021-01-24
**** DEBUG LEVEL 1 ****
OS:
Linux version 5.16.11-76051611-generic (jenkins@warp.pop-os.org) (gcc (Ubuntu 11.2.0-7ubuntu2) 11.2.0, GNU ld (GNU Binutils for Ubuntu) 2.37) #202202230823~1646248261~21.10~2b22243 SMP PREEMPT Wed Mar 2 20:
SSL libraries:
libssl.so
libcrypto.so
Fairly new to Linux. I'm trying to install CQRLog on Zorin 16 Pro and get the following message after adding the ok2cgr repository and trying to install CQRLog. This shows up at the end.
"Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help resolve the situation:
I'm running CQRlog v2.5.2, fldigi v4.1.20 along with fldigi xmlrpc.
I currently have CQRlog setup to start fldigi as remote.
The problem I'm having is the way the mode gets logged. As an example. When operating the digital mode Olivia, it will log as Olivia-8/500 or Olivia-32-1k.
At the end of the day when I upload my new QSOs to eQSL and LoTW, I get errors telling me that the mode is invalid. I then have to go into each and every log entry and change the mode to a valid entry such as: Changed Olivia-8/500 to OLIVIA, changed THOR8 to THOR.
Sorry if this has been addressed but I couldn't find it. I have recently installed CQRLog v2.5.2 on a new Ubuntu machine. For some reason, trying to import any adif log (Either downloading from LOTW, Eqsl, or a saved adif) doesn't work. It shows it downloaded then gives me an error message that the qso's aren't found in my log. Then it saves all the qso's in a text file. Any help would be greatly appriciated because I REALLY don't want to enter everything by hand. The fact that they are not found in CQRLog is kind of the point of the import right?
Hi friends
I have installed CQRlog 2.5.2
I just have a problem I can't see the TRX control frequency, I also tried to follow the video tutorial and following all the configurations steps but I couldn't solve the problem.
Is there someone who can help me ?
Thanks
Massimo
Currently running 64bit Debian GNU/Linux 11 (bullseye) on a raspberry pi 4 that has been updated as of last night and while the sourcing of the file does attempt to install the cqrlog package there are errors on the install; not sure if its related to 64 bit or not at this point.
Hi Saku!
Possibly due to classing FT4 as mode MFSK, I notice that, per band, any previously logged FT4 stations calling CQ always appear in CQ-monitor in UPPER case. Normally they should be reported in lower case, as happens in all other modes. Not really a problem, but still a bit confusing!
Robin, 9H1ZZ
Hi Saku!
Possibly due to classing FT4 as mode MFSK, I notice that, per band, any previously logged FT4 stations calling CQ always appear in CQ-monitor in UPPER case. Normally they should be reported in lower case, as happens in all other modes. Not really a problem, but still a bit confusing!
Robin, 9H1ZZ
Raspberry Pi 4 running Bullseye 32-bit
Cqrlog Ver:2.5.1 (001) Date:2021-01-24
I have over 1000 entries in eQSL, the vast majority of them from before I started using CQRlog in mid-February 2022.
When I download with the starting date set as 2022-02-15, I can successfully download any new QSLs; but I also get an annoying error message claiming that I have QSOs that are not in my log. When I check the eQSL_error.txt, the entries are clearly not after my CQRlog start date. And oddly enough they are both from the same call, but over a year apart.
Any thoughts?
Good Morning!
Two questions from a newbie, please be kind. I am not seeing these answers anyplace in the docs or FAQ.
1) There are two ham's in the house and one linux server. Can CQRLOG be user specific, and keep our own separate log files?
2) My QRP HF radio is a XIEGU G1M. Yes, it's cheap, but it works :-) Any chance of getting it to interface with CQRLOG for digital work?
Thank you, any help or pointers would be greatly appreciated.
-Chris
KO4YAW
Go easy. I'm new to Linux.
cqrlog on main pc get's qso data from fldigi running on raspberry pi, time, date, mode, call etc is transmitted to cqrlog, but when i log the contact in FLDIGI it is not loggen in cqrlog.What might i do wrong ?
Currently I do not get the reported azimuth of my antenna heading in the rotor control window. It will move the rotator to an azimuth, but fails to report the rotators current position. In reading the documentation, it appears that the Hy-Gain DCU-1/DCU-2 rotator controllers do not support the feature of reporting the current azimuth of the antenna using rotctld.
I get a Error popup message when I start my new CQRLog installation. There is apparently something wrong with my-sql server.
Can someone drive me out of the problem?
Hello,
cqrlog has a wonderful QSL Manager database.
However, when I'm importing a N1MM-contest log via ADIF Import, QSL_VIA field is left empty.
Is there some way to apply QSL_VIA field automatically from cqrlog's manager database for a filtered list of qso's after having them imported ?
73 de Rolf, DL3LAR
Hi,
Is it possible to configure cqrlog like this:
- cqrlog installed on RPI,
- start and run cqrlog via VNC from Windows 10 computer,
- usb CAT and usb K1EL winkeyer connected to usb ports on Windows computer.
or it is just my dream?
73,
Slav, EI6KW
I have looked around this forum but all references seem to be old. As you may know the some Yaesu models have a mode "DIG". When trying to get CQRLog to work directly with FT-817ND I cannot select DIG. That button doesn't appear as an option. I even tried the FT-818 mode and it didn't make a difference?
Will I just have deal with it this way and do it manually?
73,
Kevin, KX4KU
Hi group,
I recently completed a system upgrade on my desktop PC and I discovered that the program's menus and dialogs now have a tiny (and barely readable for me) font. By using the Preferences / Fonts dialog I've been able to fix some of the font sizes but some others are not affected by those settings (program dialogs, labels and menu items).
So far the rest of the installed software seems to be working as usual and I haven't encountered any font issues.
My system is as follows:
Chinese calls /WO22 incorrectly resolved as USA. Fixed in latest set of country files. Update either as automated (must be switched ON - highly recommended) or manually!
Recent comments