Hello all,
I discovered a strange behaviour on my cqrlog 2.5.2 installation. Checking "Clear RIT after saving QSO" mutes my receiver after hitting the enter key for saving a QSO. Clicking on the button does no harm.
Experienced this behaviour on two different setups, one at home one at school.
Any ideas what causes this? A bug or is it my setups? Is there anything I can check?
Tnx in advance,
Wolfgang, DJ4QV
Hi
How do i enter qso if there's no 8m entry
thanks
Gilbert
I am using CQRLog on Ubuntu Studio 20.04.01LTS, and already works fine for two years. Of course, it is upgraded to lastest.
>cqrlog/focal,now 2.5.2-1~focal amd64 [installed]
Good evening,
I am using version 2.6.0 (113) GtK2 and everything is ok. I also appreciate the possibility of being able to use several transceivers. But I have a question to ask. I'm trying to use frequency lists in .csv formats from: http://http://www.eibispace.de/ and import them to CQrlog (TRX control / preferences / Add.modify memories). Unfortunately the csv format is not compatible. Is there a possibility to adapt the csv format to make it usable by CQrlog?..
73's everyone!
I hope you can help me with my little problem...
I wanted to correct some of my qso that I made wrong, while registering the qso, the dxcc country.
For example I have put IQ0PM as Italy instead of Sardinia.. etc.. now I edit the qso, I correct the error and save the qso, nothing changes.. it always returns Italy, as well as with other qso. Where am I wrong?
Tnx for all your suggestions!
My version of Cqrlog is 2.5.2 (001) Ubuntu 20.04.5
Giuliano in3klq
Hi !
It is good to know following:
When I try to export contest-logs to edi, I receive an error "" is an invalid integer.
In my opinion, all fields are properly filled.
Which fields are checked?
How to find the cause?
Regards,
Johann OE5JWL
I found a missing letter in the prefixes of the grid entries, which solved the error.
But still the message in the bottom of the export window shows a wrong number of exported log entries - it is always 10, regardless of the entries really exported.
I am guessing no one else has ever had this problem because when I search I get nothing.
I installed CQRLOG on a SSD drive that boots my raspberry pi running Debian. I installed CQRLOG from the pi lookup in preferences. Install appeared to go well, configured preferences and called it a day. Restarted the raspberry pi to configure wsjtx and found rigctld not working. When I went to the TRX preference page I found that my radio type (IC-7300) was missing. When I went to reselect it ALL the radio definitions are gone. Restart didn’t help, reinstall worked till I rebooted the pi and then all the definitions were gone. Installed by compiling latest Hamlib. Didn’t help.
Jak usunąć duplikaty QSO z Cqrlog?
How to remove duplicate QSOs from Cqrlog?
sp5smy@pzk.pl, sp5smy@linux.pl
Paweł SP5SMY
I have installed cqrlog with the ppa repository.
That's went fine , but the layout i get is so different as when you look at the screenshots on this webpage .
A lot of fields are too big and mask some other items.
Here is my system:
Linux Lite 5.8 ( a ubuntu focal flavour)
Desktop Xfce
uname - a gives me :
Linux on4aol-HP-EliteDesk-800-G3-SFF 5.4.0-139-generic #156-Ubuntu SMP Fri Jan 20 17:27:18 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux
Is this a known problem ? Could is be the desktop Xfce ?
Hello,
I have installed Rigctld, and I am in the "dialout" group for 'ttyUSB0'.
CQRLOG find my rig (FT-920 and FT-1000), but i don't have communication with.
grep "geoffroy" /etc/group
root:x:0:geoffroy
tty:x:5:syslog,geoffroy
dialout:x:20:geoffroy
sudo:x:27:geoffroy
...
When i launch the ps command in terminal :
ps ax |grep rig
Hello,
I have installed the new version of Ubuntu (22.04) today, but i have one error during connection to database.
After lanching CQRLog with the command 'cqrlog --debug=1', i have this response :
./cqrlog --debug=1
Cqrlog Ver:2.6.0 (109) Gtk2 Date:2023-01-26
**** DEBUG LEVEL 1 ****
Hello,
I had a Hard Lock on my System and had to kill some running processes, including CQRLOG. It had found a new DXCC Table before and Download and Install was done. But after this hard kill, CQRLOG now founds a "new" DXCC Table on every Start and want to to Install it. How to clean this Issue with the Data Base?
Heinz-Juergen DO1YHJ
Was not working but tried reentering password. Which I have done several times and now working.
Can passwords be set to view instead of just showing dots?
73
Jon
Upgrade Opensuse 15.3 --> 15.4
cqrlog 2.5.2 (001)
rick@Tower:~> cqrlog --debug=1
(cqrlog:12479): dbind-WARNING **: 08:02:22.754: Couldn't register with accessibility bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Cqrlog Ver:2.5.2 (001) Date:2021-02-12
**** DEBUG LEVEL 1 ****
WHEN I USE THE WEB TAB ON THE DXCLUSTER AND USE THE ` TO SEND A SPOT, THE WINDOW APPEARS BUT WHEN I HIT "OK" BUTTON NOTHING IS SENT.
73
BENNY K5KV
Hello,
I used to tag qso when qsl has been requested by OQRS(clublog) thanks to OR value.
OQRS --> QSL will be requested by OQRS
OR --> QSL has been requested by OQRS
This value is available in QSO entry window or by Group Edit from File Menu but not in QSL menu from QSO List window.
Best 73's
Hervé
Hello,
When writing from qso list, Do Not Send (N) to a QSO, the QSL_S_DATE will automatically be filled with current day date.
Perhaps, a question could be asked if we want to add the QSL_S_DATE but it is inconsistent because no qsl is sent.
Best 73's
Hello Again .....
You can display the distance information between you and the Station worked, in the panel below the QSO List.
But, is it possible to get this information saved into the logbook itself and to display as a log entry, in a column in the QSO List ?
73, Dave G3ZXX
i just installed LM21 and the latest cqrlog. i set it up to upload to clulog but it does not work.
status shows:
ClubLog: Uploading IZ2AVK
ClubLog:
ClubLog: Done ...
ClubLog: Uploading YO7ZG
ClubLog:
ClubLog: Done ...
but when i look in clublog qso's are not uploaded.
Regin, OY1R
Hi, I'm long time Gentoo user and would like to be able to use CQRLOG on Gentoo Linux. With the Ebuild system, Gentoo builds all packages from source. There is a "package" of version 2.4.0, and someone in the forums posted an update to version 2.5.2. However it seems there is no package maintainer anymore, and on my system neither 2.4.0, nor 2.5.2 can be built. I assume it may be an issue with dependencies. The relevant error seems to be this:
cqrlog-2.5.2/src/cqrlog.lpr(6,3) Fatal: (10022) Can't find unit Interfaces used by cqrlog
Hi,
I have treid to install CQRLOG.
Error during connection to database: TMySQL57Connection : Server connect failed.
The second window states MySQL could not be started. please chek if the MySQL server is installed propperly.
I could not find the answer in the Faq Therefore as requested the last 20 lines of the error massage.
Hope some one hes the answer.
Regards Gerard
Can someone explain how exactly to use the Voice_alert.sh script?
Thanks in advance!
Dave - k8hw
Hi There
I have a query that's puzzling me - I just re-installed a log which contains around 4000 contacts, but the QSO List is only displaying a few hundred when you scroll down - the rest are not displaying at all - so how do I get to display the whole log ??
Cannot seem to fathom this one.
Would appreciate help on this one !
Thanks
Recent comments