Advanced Forum Search

An invalid vocabulary is selected. Please change it in the options.
CQRLog, CW and MFJ Keyer

Hi to All!
Is here anybody using CQRLog with the MFJ-495 MEMORY KEYER?
I've read something in the documentation about CW interface built in CQRLog but I've found no information about connecting this keyer... Now I'm using it with Cutecom (a standard software for communicating over RS-232)... But I would like to use it directly in CQRLog: it would be the same replacing the device "/dev/cwkeyer" of the image with the right device (i.e. /dev/ttyS0...)?

Any advice is really welcome...
Many thanks in advance

Franco, IK7XJA

interesting country behavior with DXCC and edit QSO with 2.6.0

Hello

I'm not sure if this is useful information, but something that I found interesting. This could be a purely local issue, but since I'm running a GIT pull I thought I'd mention it just in case.

I'm running cqrlog Ver:2.6.0 (001) Gtk2 Date:2022-07-05 compiled locally. My local system is Debian Bullseye, fully up to date. I run one copy of cqrlog on my FT8 computer, and another on my my main computer where the database is. Both copies showed the same behavior.

CW Key interface keeps popping up.

I have no CW-interface installed or defined.

Somehow during startup the CW-keyer popup telling me that I have no interface defined.

Looks to me I triggered to make the CW-keyer interface keep popping up while I have nothing configured.

No idea how this happened, but I can't turn it off. The F12 function keeps comming at every start.

This is a bug, as it is telling me there is no interface, I know, but can't turn it off.

Version 2.6.0

I would like to install v. 2.6.0 om Endeavouros (Arch-based). Does anyone know if there is a binary available for it? Or even a script to make it?
Victor 4X6GP

XMLRPC - CQRLog and FLRig on another Machine

Here's my config:

Flex3k (Power SDR) on Win10 ---> FLRig on Win10 ----> Local Network ---> Linux Box with CQRLog

Problem with CQRLOG 2.6.0 (104)

Hello everybody,

I have uploaded the 104 release of CQRLog, and when the file is copied in directoris, it's impossible to launch CQRLog...
I use Ubuntu 20.04.

Thanks.

Geoffory, ON6GMT.

Additional CW macro

I would like to see an additional CW macro for the received contest message. Something like %xmr - contest exchange message received.
Sometimes it is nice to say thank you for the message received without reaching for the paddles.

CQRLog Membership Preferences

Hi,

in CQRLog there is under "Preferences, Membership" the possibility to define 5 club memberships from a variety of possibilities.

My question is, what is the intention behind this? Is this an important feature of CQRLog that is often used? How would a user of this functionality deal with it?

73, Wolfgang
DL2KI

How best to filter for a New Band Country competition?

Yes, CQRLOG does this, but at preset I' using either an ADIF export to spreadsheet or my clumsy SQL.

Here's the problem: Our DX club has an annual competition to see who has the most "New Band Countries" for the year.

A "New Band Country" must be:

A new DXCC entity contact this year, on a new Band.

but NOT a DXCC entity logged on this Band before the contest year.

This is a filtering job that is done by lesser logging apps, so I feel sure that there has to be a simple way of doing it with CQRLOG.

How best to do?

73, John KX4QC

Fix for disappeared propagation graphic and info CQRLOG 2.5.1

Maybe old news here, but i was sad to see my little propagation graphic disappear.

Not to worry, as there seems a simple fix at https://z34pec.blogspot.com/2022/07/cqrlog-and-blank-propagation-page-af... I. have no idea if this little problem is common or just this v2.5.1

Everything works now, and i've been experimenting with the various variants suggested in the Propagation tab of Preferences. Fun and useful.

QSO not found in log

I cannot get the QSO not found window to appear when downloading from LOTW. I get the warning window that says there are QSOs not found but when I click YES to see them the window does not appear.

Any help?

73, Bill NZ0T

Database Problem

Hello,
I just tried to install cqrlog on a linux mint machine. I got the dialog box: "Database problem". Below is the info frmo the mysql.errfile.

Any recommendations will be welcome.

thanks
Kevin Fontes

Problem with logging on the eqsl.cc (Solved)

Dear all,

I recently had to start a new log to resolve a problem with uploading to clublog and hrdlog.
Downloaded the log to .adi -> create new log -> import .adi. Setting up all the other stuff.
So far, so good. It uploads now correctly to both online logs.

Unable to migrate to new computer

I am trying to migrate from a raspberry pi 4 64 bit running Ubuntu 22.04 to an amd64 also running Ubuntu 22.04. I copy the ~/.config/cqrlog folder from one machine to the other. When i attempt to start CQRLOG I get the Access Denied message. Both Abort and OK close the program. I have migrated CQRLOG several times before with no issues. Any idea what the problem could be?

Jerry
W5MIG

Review and improve remote log transfer

Hello all!

I would like to ask for a general review and eventually update of the logs transfer functionality and performance to remote logging sites.

This is a "general request" but most in particular it is directed to HRDLOG specific management which so far result the worse of the ones available, since such transfers gets not available with highest occurrence.

You can understood better what I mean by reading a brief example below of the error message:

CW daemon USB serial dead end

Hello,

I am not sure if you are the right address for this question, but since I use CQRLOG dearly, maybe you could help me out with it.
I have a cw contest coming and I wanted to make and use a keyer. cwdaemon looked the simplest. Since i don't have a classical serial port i used a FT232 chip module for usb-rs232. However, cwdaemon is not working with it it says no valid device /dev/ttyUSB1. and there is so little information online about cwdaemon.

Is there any other solution to use with cqrlog with a simple circuit or something else.

JTDX/ JTAlert Integration

Has anyone tried running CQRLOG with JTDX and JTAlert?

I have JTAlert and JTDX working using UDP 127.0.0.1

CQRLOG is on a different computer at 192.168.4.40 and JTALert/ JTDX is on 192.168.4.26

SQL Start

2022-11-09T12:52:41.795835Z 0 [Warning] [MY-013242] [Server] --character-set-server: 'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
2022-11-09T12:52:41.795916Z 0 [Warning] [MY-013244] [Server] --collation-server: 'utf8mb3_bin' is a collation of the deprecated character set UTF8MB3. Please consider using UTF8MB4 with an appropriate collation instead.
2022-11-09T12:52:41.818532Z 1 [ERROR] [MY-011011] [Server] Failed to find valid data directory.

CQRLOG starts the freezes

After starting CQRLog I get an exception. I can choose a log and it displays normally then freezes.

So far:
Installed the Linux Mint (Ubuntu) version of CQRLog
I have installed mariadb-server over mysql
Reinstalled CQRLog
Reinstalled mariadb-server

Below is the debug output from CQRLog

73 de Graeme ZL2APV

Cqrlog Ver:2.5.2 (001) Date:2021-02-12
**** DEBUG LEVEL 1 ****

autopopulate fields after adif import

I just imported a bunch of records from an adif file and certain fields like name, qth, state, loc, etc... are not populated (and weren't from the other logger). Is there a way to get cqrlog to populate these blank fields from say, HamQTH.com? I know it does this when records are manually entered, but can it do it after an import? If so, how?

Searching the forum, docs and google have not yielded anything for me yet. This seems like it would be an obvious need so I'm surprised I have not found it yet.

Thanks!

mysql db not working cant connect someone please help

Error during connection to database: TMySQL57Connection : Server connect failed. also no info on the database error screen the link to database error file dose nothing any ideas maybe not in path

Hamlib libraries

where do i find the library's for hamlib hope i dpnt have to compile them

Rotorcontroll timed_out

Good evening,
got a new easy rotor controll (ERC4 USB) kit built by today, had it flashed to use the GS232A protocol. Rotor control is working flawlessly by pressing the short path / long path buttons. Unfortunately if pressing turn left/right buttons results in errors and the rotator is not moving.
I started the rotctld by /usr/bin/rotctld -m 601 -r /dev/ttyUSB2 -s 9600 -t 4533 -vvvvv and see a

Voice keying problems

Hello,

I am very glad that CQRLOG exists and it really sums up everything what I need (of course there could be some additions like contest points calculation).

I tried to make voice keying to work, but it just doesn't. I don't know if I am doing something wrong.
I made the file in the voice_keyer folder and when I run ./voice_keyer.sh F1 it works, but when i press F1 form the New QSO window, or when I press the button on CW Message, nothing happens.
Could you please give me a hand with it please.

DX Cluster - flags for better clarity and readability

Hi,
Is it possible to make the DX Cluster list more friendly to the eye?
I.e. flags for better readability of what countries are spotted most, horizontal separating lines or different colour backgrounds for each line like in QSO list.
This is why I prefer to use dx heat or dx watch, as they are more clearer to view. But I would like to use the CQRlog built in dx cluster.

BTW, where is the search forum option? Not there anymore? Cannot search the forum for key words.

Thnx

Pages