CQRLOG 21 apr 2016

10 posts / 0 new
Last post
ok7an
ok7an's picture
CQRLOG 21 apr 2016

Hi,

I just created the first testing version of CQRLOG 2.0.1.

CHANGELOG:

- fixed "TApplication.HandleException TControl.InvalidatePreferredSize loop"
- frequency memories didn't switch between AM and FM when the radio is on USB or LSB - fixed
- bandmap didn't show CW spots when radio was in CWR mode - fixed

I've created both 32bit and 64bit versions.

http://www.cqrlog.com/files/beta/cqrlog_20160421_amd64.tar.gz

http://www.cqrlog.com/files/beta/cqrlog_20160421_i386.tar.gz

Please try it and let me know. Small how to is described here: http://www.cqrlog.com/node/1526

73 Petr, OK2CQR

PA3GOS
CQRLOG 21 apr 2016

Hi Petr,

Thank you so much. I will tomorrow. Need my sleep now.

73, Tjalling PA3GOS

PA3GOS
CQRLOG 21 apr 2016

Hi again Petr,

Just gave it a shot and it does switch modes alright. However, I have to click several times to either change Memory Channel at all and then it's still a "wild guess" which channel is chosen.
I have programmed three channels now. 5420 AM, 5365 USB and 18130 USB. If I click Mup or Mdwn, sometimes I hear the radio beep but nothing changes. Other times, the frequency and mode change but a random channel seem to be chosen. So there is no logical response.

Here is my DEBUG 1:

TelThread.Execute - before Synchronize(@frmDXCluster.SynTelnet)
TelThread.Execute - after Synchronize(@frmDXCluster.SynTelnet)
Msg from rig: 5420000
Deleted data on position:0
Msg from rig: AM
6000
Msg from rig: VFOA
Sending: fmv

Msg from rig: 5420000
Msg from rig: AM
6000
Msg from rig: VFOA
select rx_offset, tx_offset from cqrlog_common.bands where b_begin <= :b_begin and b_end >= :b_end

Sending: F 18130000

Sending: M USB 0

Msg from rig: RPRT 0
Msg from rig: RPRT 0
Sending: fmv

Msg from rig: 18130000
Msg from rig: USB
2700
Msg from rig: VFOA
select id,freq,mode,bandwidth from freqmem where (mode = 'LSB') or (mode = 'USB') or (mode = 'FM') or (mode = 'AM') order by id

Sending: fmv

Msg from rig: 18130000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 18130000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 18130000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 18130000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 18130000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 18130000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 18130000
Msg from rig: USB
2700
Msg from rig: VFOA
select rx_offset, tx_offset from cqrlog_common.bands where b_begin <= :b_begin and b_end >= :b_end

Sending: F 5420000

Sending: M AM 0

Msg from rig: RPRT 0
Msg from rig: RPRT 0
Sending: fmv

Msg from rig: 5420000
Msg from rig: AM
6000
Msg from rig: VFOA
select id,freq,mode,bandwidth from freqmem where (mode = 'LSB') or (mode = 'USB') or (mode = 'FM') or (mode = 'AM') order by id

Sending: fmv

Msg from rig: 5420000
Msg from rig: AM
6000
Msg from rig: VFOA
Sending: fmv

Msg from rig: 5420000
Msg from rig: AM
6000
Msg from rig: VFOA
Sending: fmv

Msg from rig: 5420000
Msg from rig: AM
6000
Msg from rig: VFOA
select rx_offset, tx_offset from cqrlog_common.bands where b_begin <= :b_begin and b_end >= :b_end

Sending: F 5420000

Sending: M AM 0

Msg from rig: RPRT 0
Msg from rig: RPRT 0
Sending: fmv

Msg from rig: 5420000
Msg from rig: AM
6000
Msg from rig: VFOA
Sending: fmv

Msg from rig: 5420000
Msg from rig: AM
6000
Msg from rig: VFOA
select rx_offset, tx_offset from cqrlog_common.bands where b_begin <= :b_begin and b_end >= :b_end

Sending: F 18130000

Sending: M USB 0

Msg from rig: RPRT 0
Msg from rig: RPRT 0
Sending: fmv

Msg from rig: 18130000
Msg from rig: USB
2700
Msg from rig: VFOA
select id,freq,mode,bandwidth from freqmem where (mode = 'LSB') or (mode = 'USB') or (mode = 'FM') or (mode = 'AM') order by id

Sending: fmv

Msg from rig: 18130000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 18130000
Msg from rig: USB
2700
Msg from rig: VFOA
select rx_offset, tx_offset from cqrlog_common.bands where b_begin <= :b_begin and b_end >= :b_end

Sending: F 5420000

Sending: M AM 0

Msg from rig: RPRT 0
Msg from rig: RPRT 0
Sending: fmv

Msg from rig: 5420000
Msg from rig: AM
6000
Msg from rig: VFOA
select id,freq,mode,bandwidth from freqmem where (mode = 'LSB') or (mode = 'USB') or (mode = 'FM') or (mode = 'AM') order by id

Sending: fmv

Msg from rig: 5420000
Msg from rig: AM
6000
Msg from rig: VFOA
Sending: fmv

Msg from rig: 5420000
select rx_offset, tx_offset from cqrlog_common.bands where b_begin <= :b_begin and b_end >= :b_end

Msg from rig: AM
6000
Msg from rig: VFOA
Sending: F 5420000

Sending: M AM 0

Msg from rig: RPRT 0
Msg from rig: RPRT 0
Sending: fmv

Msg from rig: 5420000
Msg from rig: AM
6000
Msg from rig: VFOA
Sending: fmv

Msg from rig: 5420000
Msg from rig: AM
6000
Msg from rig: VFOA
Sending: fmv

select rx_offset, tx_offset from cqrlog_common.bands where b_begin <= :b_begin and b_end >= :b_end

Msg from rig: 5420000
Msg from rig: AM
6000
Msg from rig: VFOA
Sending: F 18130000

Sending: M USB 0

Msg from rig: RPRT 0
Msg from rig: RPRT 0
Sending: fmv

Msg from rig: 18130000
Msg from rig: USB
2700
Msg from rig: VFOA
DX de G1TDN: 14225.0 9A709A S/CALL CROATIA TNX-EMIL-73S 1209Z
Enter critical section On Receive
Leave critical section On Receive
NOT found - A2/ZS5UZ
SELECT * FROM cqrlog_common.bands where (b_begin <=14.225 AND b_end >=14.225) ORDER BY b_begin

SELECT * FROM cqrlog_common.bands where (b_begin <=14.225 AND b_end >=14.225) ORDER BY b_begin

SELECT id_cqrlog_main FROM cqrlog001.cqrlog_main WHERE adif=497 AND band='20M' AND ((qsl_r='Q') OR (lotw_qslr='L')) AND mode='SSB' LIMIT 1

SELECT id_cqrlog_main FROM cqrlog001.cqrlog_main WHERE adif=497 AND band='20M' AND mode='SSB' LIMIT 1

dx_prefix:9A
dx_cont: EU
Freq: 14.225
Call: 9A709A
Color: clBlack
Index_: 4
2016-04-22 14:09:13 add to bandmap 9A709A
select * from call_alert where callsign = '9A709A'

Color: clBlack
Index_: 4
TelThread.Execute - before Synchronize(@frmDXCluster.SynTelnet)
TelThread.Execute - after Synchronize(@frmDXCluster.SynTelnet)
Deleted data on position:0
select id,freq,mode,bandwidth from freqmem where (mode = 'LSB') or (mode = 'USB') or (mode = 'FM') or (mode = 'AM') order by id

Sending: fmv

Msg from rig: 18130000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 18130000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 18130000
Msg from rig: USB
2700
Msg from rig: VFOA
select rx_offset, tx_offset from cqrlog_common.bands where b_begin <= :b_begin and b_end >= :b_end

Sending: F 5420000

Sending: M AM 0

Msg from rig: RPRT 0
Msg from rig: RPRT 0
Sending: fmv

Msg from rig: 5420000
Msg from rig: AM
6000
Msg from rig: VFOA
select id,freq,mode,bandwidth from freqmem where (mode = 'LSB') or (mode = 'USB') or (mode = 'FM') or (mode = 'AM') order by id

Sending: fmv

Msg from rig: 5420000
Msg from rig: AM
6000
Msg from rig: VFOA
Sending: fmv

Msg from rig: 5420000
select rx_offset, tx_offset from cqrlog_common.bands where b_begin <= :b_begin and b_end >= :b_end

Msg from rig: AM
6000
Msg from rig: VFOA
Sending: F 5420000

Sending: M AM 0

Msg from rig: RPRT 0
Msg from rig: RPRT 0
Sending: fmv

Msg from rig: 5420000
Msg from rig: AM
6000
Msg from rig: VFOA
select rx_offset, tx_offset from cqrlog_common.bands where b_begin <= :b_begin and b_end >= :b_end

Sending: F 18130000

Sending: M USB 0

Msg from rig: RPRT 0
Msg from rig: RPRT 0
Sending: fmv

Msg from rig: 18130000
Msg from rig: USB
2700
Msg from rig: VFOA
select rx_offset, tx_offset from cqrlog_common.bands where b_begin <= :b_begin and b_end >= :b_end

select id,freq,mode,bandwidth from freqmem where (mode = 'LSB') or (mode = 'USB') or (mode = 'FM') or (mode = 'AM') order by id

Sending: F 5365000

Sending: M USB 0

Msg from rig: RPRT 0
Msg from rig: RPRT 0
Sending: fmv

Msg from rig: 5365000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 5365000
DX de RA4FK: 21220.0 DV3XUK tnx QSO 1209Z
Enter critical section On Receive
Leave critical section On Receive
Msg from rig: USB
2700
NOT found - E20AX
SELECT * FROM cqrlog_common.bands where (b_begin <=21.22 AND b_end >=21.22) ORDER BY b_begin

SELECT * FROM cqrlog_common.bands where (b_begin <=21.22 AND b_end >=21.22) ORDER BY b_begin

SELECT id_cqrlog_main FROM cqrlog001.cqrlog_main WHERE adif=375 AND band='15M' AND ((qsl_r='Q') OR (lotw_qslr='L')) AND mode='SSB' LIMIT 1

dx_prefix:DU
dx_cont: OC
Freq: 21.22
Call: DV3XUK
Color: clBlack
Index_: 0
2016-04-22 14:09:34 add to bandmap DV3XUK
select * from call_alert where callsign = 'DV3XUK'

Color: clBlack
Index_: 0
TelThread.Execute - before Synchronize(@frmDXCluster.SynTelnet)
TelThread.Execute - after Synchronize(@frmDXCluster.SynTelnet)
Msg from rig: VFOA
Deleted data on position:0
Sending: fmv

Msg from rig: 5365000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 5365000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 5365000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 5365000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 5365000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 5365000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 5365000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 5365000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 5365000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 5365000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 5365000
Msg from rig: USB
2700
Msg from rig: VFOA
Sending: fmv

Msg from rig: 5365000
Msg from rig: USB
2700
Msg from rig: VFOA
SELECT COUNT(*) FROM cqrlog_main

select * from profiles order by nr

SELECT * FROM view_cqrlog_main_by_qsodate

Sending: fmv

Msg from rig: 5365000
Msg from rig: USB
2700
Msg from rig: VFOA
1
1a
2
3
4
5
6
SaveForm: frmMain
Closing QSO list window
Command line: killall xplanet
select count(*) from cqrlog001.cqrlog_config

Saving ini file to database
select count(*) from cqrlog001.cqrlog_config

Saving ini file to database
1
2
3
4
5
6
Closing DXCluster window
Closing TRXControl window
Closing GrayLine window
Closing dDXCC
Deleting config file: cqrlog.cfg
Deleting config file: 1cqrlog.cfg
Closing dData
/home/tjalling/.config/cqrlog/database/tjalling-System-Product-Name.pid
Command:
kill 21788
Closing ini file ...
tjalling@tjalling-System-Product-Name ~ $

Looks pretty normal but it seems as if no command is sent to the radio sometimes. This is not apparent in the logfile.
I also tried to set bandwidth but that does not help either.

Hope this is helpful.
73, Tjalling PA3GOS

PA3GOS
CQRLOG 21 apr 2016

Hi Petr,

It looks as if all memory channels are working in the right order if Mdwn is used. Although sometimes the radio (TS-850) refuses to change frequency.

Just an addition to my findings so far.

73 Tjalling PA3GOS

PA3GOS
Re:CQRLOG 21 apr 2016

I also tried to create an out.txt but I get "admission denied" in terminal. Also as sudo same thing.

73. Tjalling PA3GOS

PA3GOS
Re:CQRLOG 21 apr 2016

bash: out.txt: Toegang geweigerd

This is what I get in terminal.

oh1mrr
Rigctld

Seems, that randomly, when closing cqrlog, rigctld stays up. And when start
cqrlog, trx control does not work. Very hard to reproduce, but it happens. Solution
is, close cqrlog, kill rigctld pid and start cqrlog again, then should work.

Jarmo

G8FXM
G8FXM's picture
Mode Change Question?

I've just noticed in the current version ver 2.0.1 (001), that if I change mode directly on the rig front panel or in Rig Control window (FT-2000), the mode doesn’t change in the New QSO window. Changing mode in Rig Control window does change the Rig's mode, changing mode in the New QSO window does not. Is this expected behaviour ?

73'd De Dave, G8FXM O/S Linux Mint 18.1 KDE Plasma 64 bit  g8fxm@uksmg.org

G8FXM
G8FXM's picture
Please ignore this, I was

Please ignore this, I was having a senior moment, just noticed that the "Auto" checkbox was not checked. All ok now.

73'd De Dave, G8FXM O/S Linux Mint 18.1 KDE Plasma 64 bit  g8fxm@uksmg.org

kf5rll
CQRLOG 21 apr 2016

So far so good on 2.0.1 Petr, I'm running on Mint 17 server (house) / Mint 17 client (shack) all seems well - not using rigctl or hamlib so no help there. I'll let you know if anything goes south!
73' KF5RLL Tim - Hutto, Texas USA