Well it appears I have the program running but can't do any entries.
If I type a freq it rejects as bad freq on save.
If I inport an adif all reject as bad freq.
If I use rig control it rejects on save as bad freq.
Any ideas what I need to change?
No matter what I enter it says enter a valid freq in MHZ
I do nets on 3.892 and 3.895 and 3.8975 on 80m and all
reject.
Thanks for any help to point me in the right direction.
73 Tom WD0BFO
I am not a WWFF operator, but did visit three OHFFs during a boat trip and because I have my IC706 installed in my boat I decided to try WWFF activation.
Here are few hints how to use cqrlog for logging activation.
New versions of rigctld (Hamlib) have external parameter "--vfo". That seems to be requirement for wsjtx versions 2.4.0 and up.
It makes things complicated as using parameter "--vfo" at rigctld startup breaks it's backward compatibility that leads defunct of cqrlog (also my qsstv and fldigi do not like it).
So if you start rigctld from script before other programs (cqrlog,fldigi,qsstc, wsjtx) do not add parameter "--vfo". Unfortunately it may lead to older version of wsjtx needed.
Hello, I have a Kenwood TS590s with a Digikeyer2, a Yaesu FT736R with the DXP sound modem.
If I start WSJT-X via CQRLOG for example, my TS590, then I have the WSTJ-X CQ monitor window.
If I switch to the FT736R in WSJT-X via Configurations, WSJT-X is automatically terminated and restarted.
The CQ monitor window is missing and is not listed under the window entry in CQRLOG. I have to quit and start WSJT-X again and CQ-Monitor is there.
Then the entry is there again under Window.
Is there a solution, that I don't have to quit and start WSJT-X again?
Hi, I have been using CQRLOG for years and have never had too many problems with the software.
If we discount that the rigctl sometimes gets fried, of course.
But I updated Ubuntu a few days ago, and now everything is in trouble.
I tried to reinstall from scratch the version that carries UBUNTU but everything works erroneously, very slow. And all too often it gives me bbdd failure warnings.
One of the things he does now, is that he is very slow to react, even when writing the callsigns. It just happens to me with the cqrlog.
Is it possible to view the profile infos in the QSO List Window? I would appreciate if this was available as checkbox in the "visible columns" settings.
Thanks es 73 Martin HB9FSV
Hi all,
After using CQRLog for a year and a half I must say I'm very happy, thanks to everyone involved!
I use different profiles for my different rigs / QTHs. The profiles all have a unique number as identifier, and in the "view QSO" window the drop down list shows this number and also the description. This works, except for profile number zero: If I want to view an old QSO, the value remains empty.
Something not good.
IC7300 connected to PC via USB
Fldigi alone OK
Fldigi closed without problem
CQRlog OK (communicate with the rig)
remote wsjt x all OK
remote fldigi OK
BUT on closing Fldigi, TX begins transmitting until closing CQRlog...
I don't know why. Any idea ?
Thanks for help.
Hello all,
Is it possible to change the theme or at least some colors in CQR? For example, in the DXCluster the colors are green. I like green as much as the next guy but was hoping maybe I could change it.....
I know it sounds trivial but I like having the ability to make my software look the way I like it to look.
Either way, I LOVE CQRLOG and use it with my FT1000MP.
Really great software!
73 Jim W1JT
So, I have been having an issue with uploading to clublog. Basically the clublog status got stuck on trying to delete a QSO from clublog that wasn't there, so it kept on stalling. Basically I tried to clear that by marking all QSO's as uploaded, then creating an ADIF and uploading that manually to clublog. So far so good, except now, clublog has just gone through all my QSO's in the log and now deleted them from clublog. All of them. Every single last f....g one of them.
So, what gives kind sirs? Anything I can do here?
73 to all !
Using Cqrlog Ver: 2.5.2 on ubuntu 20.04
Hi,
I've been having a problem with uploading to ClubLog like some others here. I tried to search to see if I could self solve this issue but could not.
I keep getting these errors and have created the debug.log to send to you when you're ready.
ClubLog: Deleting original I1RJP
ClubLog: Could not delete original QSO data!
ClubLog: Deleting original I1RJP
ClubLog: Could not delete original QSO data!
Please advise
73 Kayne
I RECEIVED THE ICOM 7610 TODAY AND HAVE FOUND SETTINGS THAT WORK WITH THE 7610 AND CQRLOG. YES MY HAMLIB ETC IS UP TO DATE WITH THE IC-7610 AS RIG NUMBER 378 IN THE PULL DOWN MENU.
MY CQRLOG SETTINGS WERE:
RIG 378 Icom IC-7610
DEVICE /dev/ttyUSB0
POLL 2000
PORT 4532
EXTRA COMMANDS -r /dev/ttyUSB0 -m 378
SERIAL SPEED 19200
ALL OTHERS DEFAULT
THE ICOM 7610 SETTINGS ARE IN TWO SCREEN CAPTURE PHOTOS AND I CAN NOT PASTE THEM ON THIS PAGE. I CAN EMAIL THEM IF CONTACTED AT K5KV@ARRL.NET.
Hi everyone,
I have a small computer Sony Vaio VGN-TX3 on my OM station, I like it but use an old CPU (32 bit Intel
Core Solo U1400 1 x 1.2 GHz, Yonah) OS Linux Mint 17.3 Rosa.
Unfortunately last version CQRLOG 2.5.1 is not compiled for 32bit...
Can everyone help me?
TNX 73 Marco
Hi,
I'm a new cqrlog user. Version: 2.5.2 on Linux Mint 20.1
Reading data from wsjtx does not work.
- wsjtx and cqrlog running on two PC's LAN connectet
- UDP server ports are set in wsjtx and IP address in cqrlog and ports are correct (wsjtx interface)
- starting remote mode for wsjt always reports: Offline with red color
what is going wrong?
Any help are welcome.
73 Hans
Is there a way to remove the (Y) indicating the QSO has already been sent to eQSL to upload it? Even better yet to be able to select a range to resent. Hit the 'Mark all QSO's uploaded to eQSL' by mistake before uploading some QSO's.
Pat.
Greetings to this community.
I have recently installed CQRLOG, I have completed all my QSO's and little by little I am getting the hang of this good tool.
I have already managed to export to eQSL, but now I have problems exporting to LoTW. I have installed TQSL completing all the process including the certificate.
The question is: I use different QTH profiles. This is because nowadays I never transmit from home, it is always in portable mode, in different locations in the region.
Hi everyone,
I was just giving a try to new version 2.5.1 before using it in my shack PC.
After installing from PPA repository and starting CQRLog from command line, i get this line when CQRLog try to get data from web to update qslmgr table:
Line: J73WA;ND3R;2010-09
Line: V26FK;ND4DX;2020-03
Line: P4/ND7J;ND7J;W5JON
TMySQL57Connection : Error executing query: Incorrect date value: 'W5JON-01' for column `cqrlog_common`.`qslmgr`.`fromdate` at row 1
It seem getting a callsign when expected a date
Is someone encountering the same issue?
Hi
I am using CQRLOG (001) under Ubuntu 20.04 successfully since quite long but today I updated Ubuntu with the usual sudo apt-get update ..... and I realised that both mariadb server and client had new versions.
Since the update, CQRlog does not work. Afater starting it all screens appears but is blocked, no interaction with any menu can be made.
dxcluster will freeze in cqrlog. The only way to get it back is to quit and restart cqrlog is anyone else seeing this ? I only noticed this with latest release for Linux any help or suggestions are appreciated
I was searching through the filter options and saw that there are many options, but there is no filter by distance. I have distance display working where distance is calculated by grid square and shown when I click on a QSO in the log window. It would be a nice feature to be able to sort or search by distance (for example, filter all QSO over 8000 km).
Doug W1DH
Hello!
I upgraded to v2.5.1 from Ubuntu 21.04 (I couldn't use the hirsute ppa due to missing deps). I experimented with CW macros (using Hamlib) before, but with this upgraded version I notice that there are additional pauses between each character. E.g., instead of "cq cq" it's more like "c q c q".
In addition, the wpm increase by +5 after the first character. Repeatedly triggering macros adds +5 wpm with each turn.
Is this something I could fix locally?
tnx es vy 73
Stephan, oe3spr
I have realised that cqrlog is not showing all records in the database.
The records shown by a SQL query are, by date and id_cqrlog_main:
2021-05-08 1160
-
2020-10-20 770
2020-02-23 002
-
2019-05-03 123
2019-04-29 124
-
2000-05-19 769
The log is only showing qso's in the date range from today back to 2019-05-03.
Records with the id's in the range 124-769 are not shown.
Hello, i have a problem i am trying to solve. I am running ICOM 7300 and using XMLrpc with fldigi and cqrlog.The frequency rolls along fine on the radio and fldigi but the frequency for the log is just a bit ahead for some reason. i have included a picture so i can explain it better. I am running Fedora 34 XFCE. Any help would be appreciated.
73
Richard - VE6PCO
Hi all,
I'm new to CQRlog and running it on Ubuntu 20.0.4.2.
I've exported my logbook from Log4OM, on Win7, in both ADIF 2 & 3 formats but CQRlog wont import more than 960 entries of the 5500 entries in the ADIF.
I've opened the ADIF's in a text editor to check that all the records are there ( they are ) and I've checked to make sure the ADIF is UTF8.
I've double checked the band edges in frequencies and adjusted them to region 3, just-in-case that was affecting it but it still wont import all my records :(
Any help appreciated.
Recent comments