Hi Saku

Sorry for the delay in replying but its IOTA contest weekend but its ruined here due to poor WX. HI

I have tried what you suggested.

Reboot for fresh start.
Started rigctl from the command line - rigctl -m 3088 -r /dev/ttyUSB0 -s 19200
I get Rig command
enter f
its responding ok to f giving the same frequency as on the G90's display.

I now start up CQRLog with rigctl still running.

rig model #2 Net hamlib rigctld
Host 127.0.0.1 (I have a fixed ip address of 192.168.1.80 so tried that as well - ping works fine so that is ok)

I did the rest exactly as you said but frequency not appearing.

rigctl is still running and f is still returning the correct frequency but CQRLog is not displaying the frequency.

Tnx fer advice

73

Dave
GM4NFI