Hello Peter,
I try to run my YAESU FT897D with a SB-2000 MK2 USB/serial interface. But the TRX control doesn't work.
At first I have had the IOerror. So I set the dialout (sudo usermod -G dialout dc5me).
Then nothing happend until I set in Preferences ->TRX control -> the "Run rig control when program starts".
After that my radio start transmitting immediately after startup CQRLOG (without stopping). I found a post that I have to disable DTR und RTS (=OFF). Is that correct?
I have looked at every menu option I can think of but cannot find anything about importing adif files. Appreciate any help! Thanks.
Would love to see a feature added where when running the delete duplicates function, all duplicates deleted are exported to a separate file (adif?) for review; just in case there is a mistake in the delete duplicates logic.
Dave
K3DCW
With the radio conneced to the computer via USB port and port is identified as /dev/ttyUSB0 then TRX Control works properly.
If I turn the radio off and back on, the computer renames the port to /dev/ttyUSB1. When I change Preferences Device to /dev/ttyUSB1, TRX Control will not work??
TRX Control not work on USB1. It will only work on USB0. I have to reboot the computer to make the port change back to USB0.
FLDiGi will connect with either USB0 OR USB1, but CQRLOG will not connect unless the port is USB0. So it seems Hamlib is working okay.
Not sure if this is related to Clublog or CQRLog.
After my QSO with FT5ZM automatic uploading to both HamQTH and Clublog started. With HamQTH all went well.
The new QSO was uploaded as well as three other QSO's were updated due to QSL status.
Uploading to Clublog however, did not do quite as good. CQRLog tries to delete "old" data in order to replace it.
ver 1.7.1
HamQTH: Uploading FM/SP7VC ... OKHamQTH: Done ...ClubLog: Uploading FM/SP7VC ... OKClubLog: Done ...HRDLog: Uploading FM/SP7VCHRDLog: Unknown user
Preferences is configured OK with my callsign and HRDlog CODE.
Saludos,
EA4TA
Hi,
i dont know why but from 2 days i'm stuck in upload to HamQTH.
Sending QSO's to Clublog works fine.
This is message:
HamQTH: Deleting original UY0ZG
HamQTH: Could not delete original QSO data!
73! Paweł
While I'm debugging why cqrlog suddenly won't start for me, can anyone share how to retrieve qso info for QSOs?
For example, how would I retrieve all qsos info since 24 Dec 2013? I'm trying to catch up on QSLs and cannot start cqrlog at the moment, but mysql is running fine.
Tnx es 73!
Mike ab3ap
Hi Petr, just wanted to let you know everything seems to be ok in the new release, I did however find a bug, when I go into QSO list and filter the log then try and fix a DXCC entity for a logged qso,or edit the DXCC info for a qso, I get an error: reading PGvalid.Caption:Unknown property (caption), Thanks Tom
cqrlog 1.7.1 that is?
http://i39.tinypic.com/2q8bvo2.png
Rebooted machine and cqrlog started properly. However, now I have to figure out why TX Control won't work.
Thanks for the bandwidth.
ka1oz
Had to reinstall Ubuntu 12.04 (too many problems with 13.10). Now can't run CQRLOG:
When executing I get this error message: : Error executing query: Can't create database 'cqrlog_common' (errno: 2).
I have installed: hamlib-1.2.15.3
libltdl-dev
What am I missing?
73 de ka1oz
Has anyone seen and hopefully solved the following?
Thanks! 73,
Mike ab3ap
mm@ab3ap ~ $ cqrlog
(cqrlog:7198): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
please delete... it works. I had only to disconnect/connect the keyer... not an Issue of cqrlog. sorry.
I have tried editing my [DXCLUSTER] user
under ~/.config/cqrlog/cqrlog.cfg
from k5oai-17 to k5oai-1
I save the file, log out of my computer, log back in
then when I start cqrlog and start DXCluster
it logs me in as k5oai-17
how can I change that user and make it stick?
tia k5oai
CTRL+T doesn't work
I'm using kubuntu 13.10 but the program does not retain the data entered in the preferences. Once you close the program and reopen, all data are erased. This happens both with the latest version (1.7) than with previous versions. What can I do? Do you have any suggestions?
Tanks and best 73
iz3npz Ferdinando
Hello, when I try to upload log to hamqth (or HRDlog), the window "Status of log upload" opens, with the tex in it:
HamQTH: Deleting original OM13YOTAHamQTH: Could not delete original QSO data!
I do not understand, what is it. No data uploaded.
Please explain what to do with it.
tnx,
Duro, OM0XA
I just started with CQRLOG and Linux, so I am really a newbie.
Is there more information on the CI-V setting on the Icom 7200? This is posted in the online help page
Extra command line arguments usefull when you have to specify more parameters to rigctld. E.g. CIV address.
Thanks very much
N7DXT
Hi, Petr,.
I often use CQRLOG with my K1. CAT control is not possible.
It might be helpful if i could still use the keys "Mode" and "Band" in the TRX-Control Window without CAT control, to adjust the band map according or the Mode and Frequency in the "New QSO" Window.
73, Wolfgang
DL2KI
Hi
Is there any way to use an external MySQL database? I have a dedicated MySQL server and I will prefer to store my log there.
Best 73 de OX3IO, Brian
Have changed to ver 1.7.0. At the same time changed computer. Collected database from old computer which was not on version 1.7.0, but the previous one.
Seems I have some issues with some tables as on start on the new computer I get:
Database upgrade crashed with this error: : Error executing query: Table 'log_changes' already exists
Selecting OK, then CQRLOG starts fine with all log data in place, but the above start error is persistent on all startups.
How can I get rid of the error?
73 de Olaf - LA3RK
Hi Petr, just got off the air doing some PSK31 and the auto uploads to Hamqth worked perfect, with Fldigi and CQRlog in Fldigi mode, I did not try the others. So far so good, this is fun, I really like the new window, that tells me if it went or not, you have done an outstanding job on this and deserve a cold beer hi hi.. thanks so much, you have developed one of the best logging software programs available to the Ham community. Tom K8WDX
Hi, I found some behavior.
When I click on certain spots, not always set the value of the azimuth.
When entered manually - it works 100%.
Here's video with example:
http://youtu.be/nTIb593Ii6c
73! Pawel
Why? all grid, and not only JJxx,JMxx,JNxx,etc,as to previous version.
http://i40.tinypic.com/jj1rwo.png
Debian testing/jessie x86
cqrlog 1.7.0
En new qso windows.
the name of the fields(CALL,Freq,Mode,etc) was blue now black ....
Recent comments