Hi Petr,
some minor problem: in xplanet view, I recognized some callsign is shown up to three times. I looked up marker file a few times:
Advanced Forum Search
Hi
Just made first release (and pull request) of alternative remote fldigi.
It uses XmlRpc with communication between fldigi and cqrlog.
Biggest differences are:
1) you can see worked_before/DXCC status and QRZ/HamQth data like in normal cqrlogging
2) you can run fldigi on different computer than cqrlog (both must be networked)
If you are curious to see more read: http://www.saunalahti.fi/sakny/bin/cqrlog2/CqrlogAdditions2.pdf
Hi Petr,
I opened "SQL console" and from the log_changes table I would like to delete an insertion process and delete callsign (id = 241 and id = 242), so it will not run in the next online log update (on Club Log and HRDLog).
The command is this:
Delete from log_changes WHERE id = 241 AND id = 242;
It's correct?
Thanks for your help.
Giuseppe
Hi there,
in my installation, xplanet couldn't find the directional map (bck.png) which I figured out, while I was looking for a different background, than the dark stars.
However, so far, I didn't found a way for xplanet to change the background through the config file, but simply by setting up a symbolic link, the directional map background is working:
Hi there,
I come back to my post which did not get any answer!
I stopped wrongly CQR while updating the DXCC list.
Since that time CQR log does not want to start.
I get this warning at start:
Access violation.
Press OK to ignore and risk data corruption.
Press Cancel to kill the program.
I tried to re-install it but without success.
I tried to set-up manually the country list, but this also failed.
So I have no log since a few weeks, and I consider turning back to W10 and logger32!!
Thanks for your help.
Anybody there out who is using K3 with CQRlog and is experienced in RTTY and digimodes? I want to return to these modes after a very long pause. Also wanted to use true FSK (not AFSK) for RTTY. My rig is the Elecraft K-line (K3, P3, KPA500 and KAT500). It seems that fldigi would be not the right choice because of FSK mode absence (they also don't appear to implement FSK, also stock excuses on timing issues ... but Makoto JE3HHT did it in his MMTTY) - so what program?
Trying to download qso's from Eqsl, I get Error: No such Username/Password found
What's wrong? Upload works fine...? Same call same passwd?
Any idea?
Hello!
I've read many post on how to get the IC706MKIIG working with CQRLOG, but I havent been able to make my laptop work with my radio.
I already read " https://www.cqrlog.com/node/1750 " And tried everything, here is my debug error:
I have a computer that dual boots Xubuntu 16.04 & Kubuntu 16.10. I had all my ham programs on the Kubuntu partition. This morning KDE would not start. I decided to move everything to the Xubuntu partition. Everything worked except CQRLOG. I get the same errors at startup that DDOWNS described in his post of 3/23. Here is the mysql.err file from ~/.config/database:
Hi Peter,
Can you please change my account from to ON2HB to ON5HB. I got my Harec 2 months ago.
Thanks,
Bas.
New to CQRLOG and finding a few issues.
1. Import of ADIF file fails to import station QTH for the profile although the station LOC (e.g. grid) is being populated on import.
2. Some QSLS and QSLR fields are defaulting to 'B' although the import is set to 'v' in case of verified by the DXCC desk.
3. Is there a method for selecting multiple records for group edit such as click-shift rather than selecting records one by one?
I am not sure how this is supposed to work, but if I write in a callsign in Contest window and to one tab, the QSO windows will do a lookup in QRZ/HamQTH.
If this callsign was incorrect, and I correct it, it dont do a new lookup, and the values from the previous will remain.
I expected a new lookup to be done.
Hi,
after long time, we have new beta version. It's version 2.0.5 (029). This beta version includes changes merged from Saku, OH1KH who did excellent work.
CHANGELOG:
I changed my call sign recently, so I started a new database for the new call. Since both calls are in the same DXCC, they're eligible to be combined for awards and such. So I exported all columns for both, and imported them into a new (third) database. However, now in the combined DB, the DXCC CFM number only says 2 when the lotw_qslr and qsl_r shows otherwise. Is there a way to force an update of the DXCC CFM number? Is this a bug or functioning as designed?
A few months ago I was in Germany and operated as DL/PE4KH with cqrlog on my laptop. When I tried to copy the logs from the laptop to the main computer I use for amateur radio I could not find the backup .tar.gz file of the logged contacts. So I made an export and imported that, which worked fine.
But I decided to find out why the backup was missing and my suspicion was that the slash in the callsign was the reason. So I ran cqrlog with strace and indeed, the / in the callsign is used to generate the filename, and this fails:
This is a very minor issue but I have observed that if an invalid callsign prefix is entered in the QSO window, CQRLog always returns 'GM' maybe this should say invalid or unknown prefix?
Hi,
CQRlog was inadvertently stopped during DXCC file update.
Now I cant start.
I get following warning a few seconds after start (when there is only the small bug key image)
Access violation.
Press OK to ignore and risk data corruption.
Press Cancel to kill the program.
Wither I press OK or Cancel, CQRlog stops immediatly.
Version is 2.0.2.001
Debian Jessie
Any Idea to repair??
Thanks in advance.
Gérard
Hi,
Since some time ago, cannot upload log changes to HRDlog.
I get a message "HRDlog: All QSO already uploaded".
I don't know whether the issue is on CQRlog side or HRDlog.net side.
Any info on this?
Hello I use CQRLOG with my SWL call while waiting for my HAM CALL. But I also use the 11m band and would it be possible to add the band and prefix 11m !?
many thanks
Is there anyone who did fixed the connection between the ICOM IC-7300 and the great CQRLOG software?
I work with ubuntu 16.04 and tried everything. There is sofware which knows the radio (FLRIG) but thatś for me the only one.
Only FLRIG is not known with cqrlog.
Any tips would be nice!! :)
When trying to delete a character in several of the dialogues the cursor moves to the right by one character.
I've noticed this in several places and others have reported similar problems. It was in 2.0.4 (and possibly earlier) and still exists in 2.0.5
In my case the most annoying instance is in the "Export for LoTW" dialogue in the field "tqsl command line arguments. I use a lot of QTH profiles and each has it's own LoTW entry, so I change this field a *lot*.
Example: field contains: /usr/bin/tqsl -d -l "Woodland Road" %f -x
Hello,
When using CQRLOG (2.0.5) in remote mode for wsjt-x, when a callsign is selected in wsjt-x, the New QSO details automatically update in CQRLOG after a few seconds. This is nice because I can almost instantly see details such as country, name, etc., and whether I've worked the station in my CQRLOG database. However, in remote mode for fldigi, when a callsign is added to the log in fldigi, CQRLOG does not automatically update the details (it does, however properly save the log with all the details when it's saved in fldigi).
Running freshly installed Lubuntu on old Sony Vaio. One hard drive, no other OS. Installed cqrlog 2.0.5 001 and used it this weekend for the WPX Contest, SSB: 0000Z, Mar 25 to 2359Z, Mar 26. Did export DXCC statistics OK (HTML format) and .ADI log. Did close the app and upon re-launching it i got "" is an invalid integer. message. Went through the forum and found that some people had luck exporting the ini file and setting a few entries to 1 and then importing the edited ini settings. It didn't work for me.
Hi Petr,
I installed the current "cqrlog 2.0.5-1" and imported backup adi and the configuration file.
It works regularly except in a function.
Although in the "preferences" for ClubLog and HRDLog, "Upload QSO date immediately after save, update or delete" is enable, no automatic upload is executed. How can I fix?
This is the log mysql.err
Hi,
i update my Workstation with a fresh manjaro 17.0 OS. From the old manjaro OS, the hole home-folder moved to another Harddisk. On the new manjaro 17.0 i´ve install CQRLOG 2.0.4-1 and moved the CQRLOG-Folder back to the new Home-Folder. This procedure i have made several times in the past.
And now when i start the program the following messages appear:
Error during connection to database:
TMySQL56Connection: Server connect failed.
When i delete the Folder, the program starts normaly, but the QSO-List is of course, empty.
Here my mysql.err file
Recent comments