Hello--

I installed CRQLOG 0.8.2 on 2 Ubuntu PCS, problems with both.

CASE 1 --- Ubuntu 8.1 (32 bit), 3 GB memory, Athlon 64 Dual core 5000+== program runs very slow.

Case 2-- Ubuntu 8.04, 1 GB memory, Intel Celeron M, 1.5 GHz--- program opens to first screen (straight key) then goes no further.

any reasons for this on my end?

Thanks for help.

Dan KC2STA

First let me say thanks for the great product. I have the latest stable release (0.8.2) installed.
I am not sure if my connectivity issue is cqrlog or hamlibs.

I fired up the rig then fired up the computer.
Confirm cable connected.

When I start cqrlog
[george@klocalhost cqrlog]$ ./cqrlog
Starting CQRLOG ...

Rig is not OK

Rig is not OK

The user is in the uucp group which the device is writable for that group.

[george@localhost cqrlog]$ ldd ./cqrlog
linux-gate.so.1 => (0x0012a000)
libpthread.so.0 => /lib/libpthread.so.0 (0x00d21000)

Running cqrlog 0.8.1, hamlib 1.2.9, opensuse 11.0.

Here in the UK, local clock time at the moment = UTC+1. So, for example, the local time is 06:30 (displayed correctly in the system tray), making the UTC 05:30.

However, cqrlog displays the time as 04:30 in the "Start Time" and "End Time" boxes.

(By the way, fldigi reports UTC correctly).

Is there something in cqrlog I need to set up to get the correct time zone?

--
73
Ian, G3NRW

xplanet does not refresh cluster spots. I have set to refresh every 5 seconds and show last 20 spots, but there is about 80 spots on xplanet map and keeps growing. I have to close cqrlog to clear the spots.

73 Rick KR4EY

I'll report a bug in NEW QSO insertion mode....
sometimes when I create a new qso the DXCC ref. field remain void
and when I save the qso end re-edit it, the field is updated correctly...

thank you

bye, mauro

Hi,
I am unable to maximise the CQRlog screen and as such cant see the bottom couple of centimetres of the screen.
This makes the "Save QSO" button unavailable. I have changed screen resolution but this does not fix it.
I am relatively new to Linux but hoping to make it work.

I can be reached at ctmegaw@gmail.com if this is a simple problem and private tuition is necessary! I also have a screen shot of the problem if anyone would care to look.

Cheers
Chris
VK4FR

Hello,

I'm not sure if this is an intended change or not, but I now notice that if I use the arrow keys to move through the fields in the new QSO window, the program works as before when in the RST fields where the center number is selected, but when moving on to the Name field, the whole name is not selected as before (v.0.7) when QRZ info prefills the fields. I liked it when the whole name was selected especially when, say, someone goes by their middle name; I found it easier to retype names as opposed to pressing and holding "delete" and then making the changes.

Hi everyone,

I am using Fedora FC11 64bit, all libs etc are 32bit format as far as I can tell.
I have been using CQRLog for nearly 2 years without any problems until now... it's a fantastic piece of software... thank you guys!

Here is the output when I install using the terminal as a user:

[berni@mylinux install]$ ./cqrlog_install.sh

CQRLOG self extracting installer

./files.tar
./install

(install:3125): Gtk-WARNING **: Unable to locate theme engine in module_path: "glide",

I've updated to hamlib 1.2.9 and edited the configuration file. I'm not able to run the debug program or the main program for the command line. I navigated to the proper folder and even tried running under sudo. Any ideas?

Thanks, Ray AA3DW

Access Violation with rebuild DXCC Statistics and DXCC button does not work.

Works fine with my FT-847 but not with the Orion 2.
When starting grig instead (grig -m 1608 -s 57600 -r /dev/ttyUSB0 -p -P) I get a segmentation fault:
pif@DC7700-Ubuntu:~$ grig -m 1608 -s 57600 -r /dev/ttyUSB0 -p -P
2009/06/15 12:03:56;;GRIG;;4;;grig_debug_init: Debug handler initialised.
2009/06/15 12:03:56;;HAMLIB;;4;;rig:rig_init called
2009/06/15 12:03:56;;HAMLIB;;4;;rig: loading backend tentec
2009/06/15 12:03:56;;HAMLIB;;4;;tentec: _init called
2009/06/15 12:03:56;;HAMLIB;;4;;rig_register (1601)
2009/06/15 12:03:56;;HAMLIB;;4;;rig_register (1607)