I want to have wsjt-x send data to ft8mapper and cqrlog. I have tried everything from both the cqrlog docs and the net. Nothing works.

I set wsjt-x to "multicast" at 239.255.0.0, port 2237 and tl = 2. ft8mapper set to the same ip and port. CQRLOG set to the same ip and port. The wsjt address is set to 239.255.0.0. I do not know what to enter into the adif port.

I start wsjt from cqrlog. Data goes to ft8mapper no problem but nothing goes to CQRLOG. I used to use gridtracker a the middle man. It had simple settings to recive udp and the forward it to a port on the same server. Unfortunatly there are video problems. The gridtracker maps are not displayed, as they should be, within the programs gui. To get arroud that I use ft8mapper that does show the data in real time. The qso data stops there. It does not make to cqrlog. A post in the fourm states "the latest version automaticaly supports multicasting on address suchas 2390255.0.0." I have versio 2.5.2.

I need to know exactly how to setup communication between the three apps in simple step by set procedure.

Thanks,
Marty N3MOW