Hello to all,
I have compiled cqrlog to the latest version 2.6.0(116)Gtk2. The problem with the version 2.5.2(001) was that I was not able to upload to clublog (internet connection error). With this latest version, it's ok but:
On the "New QSO..." screen of cqrlog, I am not able to change the Frequency. This one always displays 145.0000. When I try to select or enter something else, it almost immediately come back to 145.0000
When I use the TAB key on the keyboard, it jumps from "Call" entry box directly to "RST sent" box.
cqrlog has been compiled on Ubuntu 22.04.2 LTS
Many thanks for your help and advices.
Guy
Hello,
I solved the problem by entering a rig on the TRX control page.
No transceiver is connected to the computer but the previous action seems to have solved the problem.
Best 73's
Guy
HI Guy!
If you do not have rig and have selected rig model "hamlib dummy" it defauts virtual rig to 145MHz.
You can drive this virtual rig as you have noticed with TRXControl like it would be real rig.
Frequency column can be filled, or selected from selector, when you set rig to non existing model like #4"flrig" or #6 "hamlib no vfo" and do NOT check "Run rigcltd at program start".
Actually any rig will do if you do not start rigctld at program start.
Selecting rig #1"Hamlib dummy" defaults "Run rigcltd at program start". as checked. This is for testing purposes without rig connected but can as well be used if there is no cat controlled rig at station.
--
Saku
OH1KH
Hello Saku,
Many thanks for your very useful comments,
Best 73's,
Guy