You are here

Exclude frequency from TRX-Control when Auto is unmarked

2 posts / 0 new
Last post
la2fda
la2fda's picture
Exclude frequency from TRX-Control when Auto is unmarked

I am using two different rigs with my cqrlog. One stationary and one QRP tranceiver. Only my stationary is connected to CqrLogs's Rig Control.
When I use my QRP tranceiver with CqrLog, I use to swith off my stationary tranceiver.
"AUTO" is unmarked, and Mode is possible to update manually.
The frequency is not possible to update. It is always falling back to my latest used frequency on my stationary rig.
 
The only way to update the frequency is to put a mark in "Offline", but then my "Start and End time" is locked at the time I marked it . If I want to change End Time, I have to unmark "Offline", and the frequency goes back to my latest used frequency on my stationary rig.
I am not sure if the program is ment to work like this, but if it is, I suggest to make it possible to manually enter the frequency when "AUTO" is unmarked.
73
de LA2FDA, Stein

ok2cqr
ok2cqr's picture
Re: Exclude frequency from TRX-Control when Auto is unmarked

Hi Stein,
 
the Auto checkbox is usefull for people who use digital modes. If you don't want to read the frequency from the rig, swith to second radio using CTRL+2 hotkey. You can return back with CTR+1. I suppose you don't have the second rig configured.
 
This hotkey has been available for a while but I'm not sure if it works correctly. Unfortunately I don't have any rig connected my noteboook for now, I can't test it.
 
73 Petr, OK2CQR