Filter out FT8 connections on the DX cluster?

8 posts / 0 new
Last post
DD2NU
Filter out FT8 connections on the DX cluster?

Hello,

how can I filter out FT8 connections on the DX cluster? I only do cw and the FT8 entries bother me a lot.
Many Thanks.

Frank
DD2NU

oh1kh
Filter out FT8 connections on the DX cluster?

HI!

Use the filter commands of DXCluster. Make filters either for text FT8 or frequency, or both.

http://www.dxcluster.org/main/usermanual_en-12.html
http://www.qsl.net/sv1grb/psk31.htm

--
Saku
OH1KH

oh1kh
Filter out FT8 connections on the DX cluster?

Or maybe it is better to accept only CW part's frequencies on each band instead of denying the FT8 side.
That way you get only CW and nothing else.

http://www.dxcluster.org/main/filtering_en.html

--
Saku
OH1KH

DD2NU
Filter out FT8 connections on the DX cluster?

Hello Saku,

thank you for the information. I tested the following:

reject / spots 0 info FT8
accept / spots 1 on hf / cw and not (on hf / data or on hf / rtty)

That works great.
It would be nice if these commands could be entered in the DX Cluster setup in the CQRLOG setup. Is there a way?

Frank
DD2NU

oh1kh
Filter out FT8 connections on the DX cluster?

Hi!

Nice to hear that you got it working as desired.
There should not be need for that as DXCluster remembers settings for your login call (at least it should!).

Latest Beta version allows one command line to be sent to DXCluster after connect established. That line can be set at preferences/DXCluster (at bottom of tab).

--
Saku
OH1KH

DD2NU
Filter out FT8 connections on the DX cluster?

Hello Saku,

the ability to specify a DXCluster line in the last beta version of CQRLOG is great.

Frank
DD2NU

f1uod
Filter out FT8 connections on the DX cluster?

Hi,

"accept/spots 1 on hf/ssb and not (on hf/data or on hf/rtty or on hf/cw) and not info FT8"

accept ssb and reject (data + rtty + cw + FT8)

Best regards

F1UOD Philippe

From Toulouse

dd5xx
DXcluster node dd5xx.dxcluster.net:7000 (no digital modes here)

or just connect to DX cluster node DD5XX-10 without the need for configuring anything on your logbook software.

Hostname/IP: dd5xx.dxcluster.net
Port: 7000

Default filters in use:

- NO digital mode spots like FT-8, FT-4, PSK, RTTY, JT65, JT9, MSK, EME
- only HF + 6m shown (160/80/60/40/30/20/17/15/12/10/6m band)
- spots from or to Europe (CQ zone 14,15,16,20).

Enjoy and have fun in a digital mode free cluster environment.

no FT8, no digital modes DXcluster node DD5XX-10
Hostname/IP: dd5xx.dxcluster.net
Port: 7000