ICOM 736 not switching to LSB below 10 MHz

5 posts / 0 new
Last post
kb2syd
ICOM 736 not switching to LSB below 10 MHz

Everything else seems right. Here's a shot of the screen activity. Never changes mode, even for CW

Msg from rig: 21091000
Msg from rig: USB
2100
RPRT -11
Sending: fmv

Msg from rig: 21091000
Msg from rig: USB
2100
RPRT -11
qBands.RecorfdCount: 1
TdmData.BandModFromFreq:TRUE cw 7.035 ssb 7.043
Sending: F 7197000

Sending: M LSB 1800

Msg from rig: RPRT 0
Msg from rig: RPRT -9
Sending: fmv

Msg from rig: 7197000
Msg from rig: USB
2100
RPRT -11
Sending: fmv

Msg from rig: 7197000
Msg from rig: USB
2100
RPRT -11
Sending: fmv

oh1kh
ICOM 736 not switching to LSB below 10 MHz

Hi!
Are you sure that yuor rig can do lsb with 1800 bandwidth?

Set bandwidth to 0 (in "modes") then defaults are used. Check also band frequencies.
https://www.cqrlog.com/help/h1.html#ah6

--
Saku
OH1KH

kb2syd
I did that. No change. Where

I did that. No change. Where are the band frequencies set? Same place, or is there a bands page. Don't remember off the top of my head.

Thanks,
Kelly

kb2syd
Forget that question. I see

Forget that question. I see you specified. Will try again tonight.

Thanks
Kelly

kb2syd
Making those settings 0

Making those settings 0 worked. I'm sure I tried it before and it didn't but now it works for sure. Thanks for the help.