Failure to run, help

5 posts / 0 new
Last post
KD5BM
Failure to run, help

Failure to run, solved, Installed Lubuntu as OS.

Now, If I can get CQRLOG to control my TS 590?
 
 

ok2cqr
ok2cqr's picture
Re: Failure to run, help

Changing of whole distribution because of one error is not good idea. Deleting original post is bad idea. I know the solution, I noticed your post this morning but I had to go to work. I have a solution in my mailbox but now I don't know the excat error message you've got.
 
You have connected the radio through the usb? You must find out what port is assigned to your radio (using dmesg command) and put it to CQRLOG configuration. Also find out the rig id in HamLib documentation. I don't know if lubuntu is dirrent but in Ubuntu, you have add yourself to dialout group.
 
73 Petr, OK2CQR

KD5BM
executable file not found: ‘user/bin/rigctld”

From: terminalCommand:  cqrlog --debug-m 231 -r /dev/ttyUSB0 -t 4532starting rigctld E: executable file not found: ‘user/bin/rigctld”rigctld failed to startUsing Ubuntu 15.04--Vidid VervetKernel Linux 3.19.0-16-generic (x96-64)

ok2cqr
ok2cqr's picture
Re: executable file not found: ‘user/bin/rigctld”

Please add / on the beginning of the path to the rigctld.
 
/user/bin/rigctld
 
73 Petr

KD5BM
Failure to run, follow-up

CQRLOG 1.82 in Lubuntu works fine, will try your suggestion on the USB port to control ts590.  Thanks...